Ideal for use in:

Living Rooms

Dining Rooms

Bedrooms

Stairs/halls

Royale concrete gripper comes with extra tough pre-nailed masonry (concrete) nails 20mm (3/4") which are for nailing down into the a hard sub-floor. It comes also with medium length pins which are suitable for use on all carpet types.

This gripper works for stretch fitting carpet installations over concrete floors. Royale gripper is made from high-grade resin bonded plywood, five-ply (6mm) thickness, machined on one edge to a defined angle and penetrated from the underside by two rows of passivated pins.

The Pins are set at an angle of 60deg to eliminate pull-out and bending, even when power stretching. The carpet backing is then held in place by the pins to allow for correct tension

Want the best gripper? Look at Mechanical Gripper

Type: Gripper
Subfloor: Concrete
Suitability: Domestic & Commercial
Application: Nail gripper approximately 6mm away from the face of the skirting so that the carpet can be tucked into the gap between the gripper and skirting board.
Pack Size: 500Ft (100 x 5ft Lengths) 152.4metres
Pin Size: 4.8mm
Thickness: 6mm